Yes, you can. RetroFoam insulation is both soft and pliable. Its composition makes it very easy to fish electrical wiring through the injection foam insulation, as well as remove section for pipe repair.
Let's go more in-depth on how fishing wires through RetroFoam works and how you can do pipe repair if you spring a leak.
Whether you’re adding new outlets, a surround sound system, or your electrical needs to be updated, you need to run wires through your walls, and you’re wondering how to do it. You're also wondering how to repair plumbing without a complete demolition crew if you need repairs.
When trying to fish a wire through an insulated wall, the biggest concern is making sure not to damage the foam, creating any air gaps. Those gaps can break the foam’s air seal and allow for air movement into and out of the walls.
When it comes to plumbing, your biggest concern is how you'll even get to the pipes in the first place.
Here at RetroFoam, we get asked a lot about plumbing repairs and running wires through our injection foam insulation. There are many misconceptions out there regarding working with foam insulation, so we clear that up pretty frequently.
We want to provide homeowners with all of the information they need for home insulation and any projects that might arise involving it. We’re going to explain how you can repair your plumbing and fish wire through RetroFoam, through certain spray foams, and a workaround when the wire can’t be pulled through the insulation.
When you fish wire through existing foam insulation, it takes patience and skill to make sure you don’t create a gap for air to get through.
For this article, we’re going to focus solely on whether the wire can be fished through either RetroFoam, open cell spray foam, or closed cell spray foam. If you need help with the hole drilling or other aspects of the project, there’s always YouTube.
You might find two kinds of spray foam insulation in existing walls – open cell and closed cell.
Now, usually closed cell spray foam is better suited for the exposed walls of pole barns or commercial buildings, but you do occasionally find it in residential walls as well.
Let’s talk about open cell spray foam first because it is a very quick answer.
Open cell spray foam is soft and pliable enough that you can pull the fish tape through it to add new wiring. All you have to do is pull the wire through to where you want it to go.
See, quick and easy.
Now closed cell spray foam offers more of a challenge and is the reason why you have probably heard that foam insulation is impossible to work with.
Closed cell is very dense, so you can’t fish wiring through it. You’re probably wondering how to pull wire through spray foam insulation like closed cell. Well, where there’s a will, there’s a way.
There are some instances when you might be able to fish the wire in front of the closed cell spray foam. If not, you may have to remove drywall to get that electrical wiring where you need it.
RetroFoam injection foam insulation is actually softer and more pliable than open cell spray foam.
Its composition makes it the easiest of the three foam insulation types mentioned in this article to work with. This material is delicate enough to push the wire through without any hesitation.
You have plumbing that needs to be repaired in your wall, but you also have foam insulation in there as well.
The same rules apply when it comes to spray foam and RetroFoam insulation as it does for fishing wiring, as far as how easy it is to work with the materials.
Let's talk about spray foam first.
There are two types of spray foam that could have been used in your walls -- open cell spray foam and closed cell spray foam.
When it comes to repairing plumbing, the easier of the two to work with will be open cell spray foam because it is pliable and easy to work with. Closed cell will be harder to work with because it is much denser.
In either scenario, you will need to remove the foam from the area where the repairs need to be made. The closed cell might be harder to cut out because of its density, while the open cell should come out fairly easily.
Once the foam is removed, the plumbing can be repaired, and you can have the spray foam touched up where it needed to be removed.
The process of repairing plumbing in a wall with RetroFoam insulation is similar to open cell spray foam.
RetroFoam injection foam insulation is quite pliable, so you can remove the section or sections where the repairs need to be made. Once the work is done, you can have the areas touched up where the foam was removed.
In most cases, you can repair your plumbing or fish a wire through an insulated wall depending on the type of existing foam insulation that is in there.
The best way to tackle this kind of project is to know exactly what kind of foam insulation is in your existing walls. That way, if you have to hire an electrician or plumber, you’ll be able to find one that has worked with the material before.
If you’d like to learn more about RetroFoam insulation and dispel some more myths, check out the Learning Center on our website.
What is the Difference Between RetroFoam Injection Foam and Spray Foam Insulation?
How to Tell if There is Insulation in the Wall